Bridge for Blinds Installation

Unpack and Set-up:

  • Unpack and plug in your device.
  • Choose between setting up the bridge in its final location, or setting it up in a convenient location and then moving the bridge to its final location after setup is complete.
  • When choosing a final location for the bridge, choose a centralized location to maximize communication with all of the blinds.

Pair the Bridge to your MySmartBlinds Account:

  1. Install or Open the MySmartBlinds app (using your phone or tablet, search for "MySmartBlinds" in the App Store)

  2. Tap the Three-Line Menu Button in the upper left corner of the MySmartBlinds app

  3. Tap Bridge on the side menu

  4. Tap Add Bridge (or use the + button on an Android device)

  5. If the light on the Bridge is not spinning purple, press and hold the Center Button on the Bridge (for 5 seconds) until the light starts spinning purple

  6. App should now connect to your Bridge

  7. Choose a name for your Bridge (tap Next)

  8. Select your WiFi network (tap Next)

  9. Provide the password for your WiFi (tap Next)

  10. The Bridge for Blinds is now setup and ready to use